All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetThreshStatus
s3EnetThreshStatus
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetThreshStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.2.8.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of the threshold.
The possible values for a write are:
addActive(1)...If the entry does not exist, the entry is created as long as the other necessary objects are in the SNMP SET request. If the entry does exist and is inactive, it is activated. delDead(2).....Causes the entry to be deleted from the table. It could take 5 seconds after delDead(2) is written to actually delete the entry due to task scheduling.
The possible values for a read are:
addActive(1)...This threshold entry is active. delDead(2).....This threshold entry is inactive and will be deleted in 5 seconds or less.
What is s3EnetThreshStatus?
Row control for a threshold: writing addActive(1) creates the entry (if the other required objects are in the SET) or activates an inactive one, and delDead(2) deletes it, which can take up to 5 seconds. On read, addActive(1) means active and delDead(2) means it will be deleted within 5 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.2 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.2.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.2.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetThreshStatus OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.8 | s3000EnetThreshold | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1 | s3EnetThreshTable | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1.1 | s3EnetThreshEntry | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.2 | s3EnetThreshStatus | SYNOPTICS-ETHERNET-MIB |