SYNOPTICS-ETHERNET-MIB :: s3EnetThreshObject

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetThreshObject

s3EnetThreshObject

Module: SYNOPTICS-ETHERNET-MIB

OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetThreshObject

OID (numeric): 1.3.6.1.4.1.45.1.3.2.8.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the part of the concentrator the threshold applies. The possible values are:

other(1)..........Unknown threshold (error) concentrator(2)...The threshold applies to the segment the NMM is connected to within the concentrator slot(3)...........The threshold applies to a specific slot in the concentrator identified by s3EnetThreshSlot port(4)...........The threshold applies to a specific port in the concentrator identified by s3EnetThreshSlot and s3EnetThreshPort

All values are read-write with the exception of other(1), which is read-only.

See the description of the object s3EnetThreshType for the explanation of which thresholds are applicable to port(4), slot(3), and concentrator(2).

What is s3EnetThreshObject?

What part of the concentrator the threshold applies to: concentrator(2) for the whole attached segment, slot(3) for one board, port(4) for one port; other(1) is read-only and means an unknown threshold. Pick the level to match where you want to be alerted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.3
snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshObject

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.3.1
snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshObject.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.3.1 i <value>

Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetThreshObject OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsCMU-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-BASIC-ETHTOK-MIB
1.3.6.1.4.1.45.1.3series3000SYNOPTICS-BASIC-ETHTOK-MIB
1.3.6.1.4.1.45.1.3.2s3000EthernetSYNOPTICS-BASIC-ETHTOK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.3.2.8s3000EnetThresholdSYNOPTICS-ETHERNET-MIB
1.3.6.1.4.1.45.1.3.2.8.1s3EnetThreshTableSYNOPTICS-ETHERNET-MIB
1.3.6.1.4.1.45.1.3.2.8.1.1s3EnetThreshEntrySYNOPTICS-ETHERNET-MIB
1.3.6.1.4.1.45.1.3.2.8.1.1.3s3EnetThreshObjectSYNOPTICS-ETHERNET-MIB