All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetThreshDuration
s3EnetThreshDuration
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetThreshDuration
OID (numeric): 1.3.6.1.4.1.45.1.3.2.8.1.1.12
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description: Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window is broken down into 5 second sampling periods for purposes of checking the threshold conditions, and determining when the actions specified need to take place when the condition occurs.
If this object is written with a value that is not evenly divisible by 500, the agent will internally round the value up to the closest integral of 500 before it is used in threshold calculations (i.e., a value of 12 can be written, but will be interpreted as 15).
Notes: 1.) A value of zero indicates an infinite duration window if the value of s3EnetThreshCondition is crossValue(2) or overValue(3).
2.) If the value of s3EnetThreshCondition is overRate(4) or overRatio(5), a value of zero is equivalent to a duration window of 5 seconds.
3.) If the value of s3EnetThreshType is linkStatus(12), this value of this object is ignore and assumed to be infinite.
What is s3EnetThreshDuration?
Length of the window over which threshold counts are summed, in TimeTicks, checked in 5-second (500-tick) sampling periods; values not divisible by 500 are rounded up (12 is treated as 15 in the source's example). Zero means an infinite window for crossValue/overValue conditions and 5 seconds for rate/ratio conditions, and it is ignored (infinite) for link-status thresholds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.12 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshDuration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.12.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshDuration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.12.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetThreshDuration OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.8 | s3000EnetThreshold | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1 | s3EnetThreshTable | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1.1 | s3EnetThreshEntry | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.12 | s3EnetThreshDuration | SYNOPTICS-ETHERNET-MIB |