All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetShowNodesAuthStatus
s3EnetShowNodesAuthStatus
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesAuthStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.2.5.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The object is used determine how the node was added to this table. If the node was learned by listening to the network then on reads network(2) should be returned. If the node is another NMM or known concentrator device, then nmm(3) is returned. If the device's MAC address is unknown because of some unknown but legal configuration, then other(1) should be returned and s3EnetShowNodesMacAddress should return all zeros. If the node was entered into the AllowedNode list via management control, and was seen on a port that it was authorized to use, then authorized(4) should be returned.
What is s3EnetShowNodesAuthStatus?
How the node got into the table: network(2) learned from the wire, nmm(3) another NMM or known concentrator device, authorized(4) allowed by management and seen on its authorized slot/port, other(1) for an unknown but legal configuration (in which case the MAC address object returns all zeros).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.5.1.1.6 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesAuthStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.5.1.1.6.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesAuthStatus.1
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesAuthStatus OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.5 | s3000EnetNode | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.5.1 | s3EnetShowNodesTable | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.5.1.1 | s3EnetShowNodesEntry | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.6 | s3EnetShowNodesAuthStatus | SYNOPTICS-ETHERNET-MIB |