All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetRedPortSwitchoverTime
s3EnetRedPortSwitchoverTime
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetRedPortSwitchoverTime
OID (numeric): 1.3.6.1.4.1.45.1.3.2.3.3.1.9
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description: The length of time before the ports making up the redundant port pair revert back to their orignal active or standby roles as defined before the timed switchover was setup.
The value of this object is meaningful (i.e., non-zero) only when the redundant port pair is undergoing a timed switchover, which is indicated by the object s3EnetRedPortSwitchoverStatus having the value of timedSwitchover(2).
This object may only be written in the same SET request that changes the object s3EnetRedPortSwitchoverStatus to timedSwitchover(2). Afterwards, it indicates the amount of time left before the timed switchover is completed, at which time another switchover occurs and s3EnetRedPortSwitchoverStatus is changed to other(1).
This object has the value of zero if the port is not undergoing a timed switchover, or if the amount of time is unavailable.
What is s3EnetRedPortSwitchoverTime?
Time left before a timed switchover reverts the redundant pair to its original roles, in TimeTicks. It can only be written in the same SET that sets the switchover status to timedSwitchover(2) and is 0 when no timed switchover is active or the time is unavailable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.3.1.9 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetRedPortSwitchoverTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.3.1.9.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetRedPortSwitchoverTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.3.3.1.9.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetRedPortSwitchoverTime OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3 | s3000EnetPort | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.3 | s3EnetRedPortTable | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.3.1 | s3EnetRedPortEntry | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.3.3.1.9 | s3EnetRedPortSwitchoverTime | SYNOPTICS-ETHERNET-MIB |