All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetRedPortRedundMode
s3EnetRedPortRedundMode
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetRedPortRedundMode
OID (numeric): 1.3.6.1.4.1.45.1.3.2.3.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The redundancy mode of the port.
The possible values read, which report the redundancy mode of the port, are: standalone(1)...the port is not in any redundant pair. hwActive(2).....the port is the active companion in a hardware-redundant pair. hwStandby(3)....the port is the standby companion in a hardware-redundant pair. swActive(4).....the port is the active companion in a software-redundant pair. swStandby(5)....the port is the standby companion in a software-redundant pair.
The values that can be written, which change the redundancy mode, are: standalone(1)...causes the software-redundant pair to be broken up. hwActive(2).....if the previous value was hwStandby(3), this value will cause the port to become the active port in the hardware-redundant pair (i.e., a switchover). hwStandby(3)....if the previous value was hwActive(2), this value will cause the port to become the standby port in the hardware-redundant pair (i.e., a switchover). swActive(4).....if the previous value was swStandby(5), this value will cause the port to become the active port in the software-redundant pair (i.e., a switchover). swStandby(5)....if the previous value was swActive(4), this value will cause the port to become the standby port in the software-redundant pair (i.e., a switchover).
Notes: 1.) The value standalone(1) cannot be written to effect hardware-redundant pairs.
What is s3EnetRedPortRedundMode?
Redundancy role of the port: standAlone(1), hwActive(2), hwStandby(3), swActive(4) or swStandby(5) for hardware- and software-redundant pairs. Writing swapping values (for example hwActive on a hwStandby port) forces a switchover, and writing standAlone(1) breaks up a software-redundant pair; standAlone cannot be written to break hardware pairs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.3.1.3 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetRedPortRedundMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.3.1.3.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetRedPortRedundMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.3.3.1.3.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetRedPortRedundMode OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3 | s3000EnetPort | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.3 | s3EnetRedPortTable | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.3.1 | s3EnetRedPortEntry | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.3.3.1.3 | s3EnetRedPortRedundMode | SYNOPTICS-ETHERNET-MIB |