All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetPortPartStatus
s3EnetPortPartStatus
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetPortPartStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.2.3.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port.
If a timed partition is desired, then writing timedPartition(4) to this object at the same time that a time value is supplied in s3EnetPortPartTime is required. Timed partitions will not survive across a reset. In this case the port will go to the partition(2) state.
The value latSecPartition(5) is returned when the port has been automatically partitioned by the LattisSecure Host Module because of a security violation. The value autoPartition(3) is returned when the port has been automatically partitioned by the repeater using the 802.3 repeater auto-partition function.
The agent will not allow this object to be set to autoPartition(3) or latSecPartition(5) using an SNMP request.
What is s3EnetPortPartStatus?
Operational/partition state of the port: enabled(1), partition(2), autoPartition(3) by the repeater's 802.3 auto-partition, timedPartition(4), latSecPartition(5) by LattisSecure after a security violation. Writing partition(2) disables the port indefinitely, enabled(1) re-enables it, and timedPartition(4) must be written together with a time value; timed partitions revert to partition(2) after a reset. The agent refuses writes of autoPartition or latSecPartition. This object is deprecated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.1.1.4 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetPortPartStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.1.1.4.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetPortPartStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.3.1.1.4.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetPortPartStatus OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3 | s3000EnetPort | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.1 | s3EnetPortTable | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.1.1 | s3EnetPortEntry | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.3.1.1.4 | s3EnetPortPartStatus | SYNOPTICS-ETHERNET-MIB |