All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetBoardAuthStatus
s3EnetBoardAuthStatus
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetBoardAuthStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.2.2.1.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is only used if s3EnetConcSecureStatus is set to slotCheckOn(4). In this case, turning this object on(2) means that any node that is heard on this board which is not allowed on this board (i.e., not in AuthNode table with the slotIndex equal to this board or 0 for all boards) will cause the action specified in s3EnetBoardAuthAction to take place.
If s3EnetConcSecureStatus is set to slotCheckOn(4) but this object is set to off(3), then the authorized nodes feature for this board is deactivated.
If s3EnetConcSecureStatus is not set to slotCheckOn(4), then this object will not be used but will maintain its settings unless explicitly changed.
This object does not affect the configuration or functioning of security features on LattisSecure Host Modules.
What is s3EnetBoardAuthStatus?
Per-board allowed-nodes switch, used only when the concentrator security mode is slotCheckOn(4): on(2) means a node heard on this board that is not authorized for it (or for all boards) triggers the board's authorization action, off(3) disables the feature for the board. If the concentrator is in another mode the setting is kept but unused, and LattisSecure host modules are unaffected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.2.1.1.19 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetBoardAuthStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.2.1.1.19.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetBoardAuthStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.2.1.1.19.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetBoardAuthStatus OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.2 | s3000EnetBoard | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.2.1 | s3EnetBoardTable | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.2.1.1 | s3EnetBoardEntry | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.2.1.1.19 | s3EnetBoardAuthStatus | SYNOPTICS-ETHERNET-MIB |