All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetAuthNodesStatus
s3EnetAuthNodesStatus
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetAuthNodesStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.2.5.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of the AuthNodes entry. The primary use of this object is for modifying the AuthNodes table. It is also returned in the enetAuthViolation trap, in which case it indicates whether the violating MAC address was found in the AuthNodes table.
Setting this entry to invalid(1) causes the entry to be deleted from the table. Setting a new entry with valid(2) causes the entry to be created in the table. The response to a get request or get-next request will always indicate a status of valid(2), since invalid entries are removed from the table.
What is s3EnetAuthNodesStatus?
Status of an allowed-nodes entry: setting invalid(1) deletes the entry and valid(2) creates it; reads always return valid(2) because invalid entries are removed. It is also returned in the enetAuthViolation trap, where it shows whether the violating MAC address was in the table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.5.4.1.4 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetAuthNodesStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.5.4.1.4.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetAuthNodesStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.5.4.1.4.1 i <value>
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetAuthNodesStatus OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.5 | s3000EnetNode | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.5.4 | s3EnetAuthNodesTable | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.5.4.1 | s3EnetAuthNodesEntry | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.5.4.1.4 | s3EnetAuthNodesStatus | SYNOPTICS-ETHERNET-MIB |