All MIBs › SYNOPTICS-BASIC-ETHTOK-MIB › s3EnetCommonPortPartStatus
s3EnetCommonPortPartStatus
Module: SYNOPTICS-BASIC-ETHTOK-MIB
OID (symbolic): SYNOPTICS-BASIC-ETHTOK-MIB::s3EnetCommonPortPartStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.2.3.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port.
If a timed partition is desired, then writing timedPartition(4) to this object at the same time that a time value is supplied in s3EnetCommonPortPartTime is required. Timed partitions will not survive across a reset. In this case the port will go to the partition(2) state.
The value latSecPartition(5) is returned when the port has been automatically partitioned by the LattisSecure Host Module because of a security violation. The value autoPartition(3) is returned when the port has been automatically partitioned by the repeater using the 802.3 repeater auto-partition function.
The agent will not allow this object to be set to autoPartition(3) or latSecPartition(5) using an SNMP request.
Note that the value timedPartition(4) is returned only when the board is timed partitioned by this NMM.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.2.1.4 snmpwalk -v2c -c public <target> SYNOPTICS-BASIC-ETHTOK-MIB::s3EnetCommonPortPartStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.3.2.1.4.1 snmpget -v2c -c public <target> SYNOPTICS-BASIC-ETHTOK-MIB::s3EnetCommonPortPartStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.3.2.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> s3EnetCommonPortPartStatus.1
Start monitoring SynOptics (Bay Networks/Nortel) Ethernet/Token Ring hubs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-BASIC-ETHTOK-MIB::s3EnetCommonPortPartStatus OID value, configure state conditions and alerts, and monitor any SynOptics (Bay Networks/Nortel) Ethernet/Token Ring hubs from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3 | s3000EnetPort | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.2 | s3EnetCommonPortTable | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.2.1 | s3EnetCommonPortEntry | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.4 | s3EnetCommonPortPartStatus | SYNOPTICS-BASIC-ETHTOK-MIB |