All MIBs › SYNOPTICS-BASIC-ETHTOK-MIB › s3AgentBaudRate
s3AgentBaudRate
Module: SYNOPTICS-BASIC-ETHTOK-MIB
OID (symbolic): SYNOPTICS-BASIC-ETHTOK-MIB::s3AgentBaudRate
OID (numeric): 1.3.6.1.4.1.45.1.2.4.8
Node type: OBJECT-TYPE
Type: Gauge
Access: read-write
Description: Specifies the baud rate in bits per second of either the internal modem or the RS-232 port.
This parameter will take effect only after a restart (s3AgentRestart) is issued. This parameter will not survive a reset (s3AgentReset) unless the specific NMM configuration file is updated to reflect the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.2.4.8 snmpwalk -v2c -c public <target> SYNOPTICS-BASIC-ETHTOK-MIB::s3AgentBaudRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.2.4.8.1 snmpget -v2c -c public <target> SYNOPTICS-BASIC-ETHTOK-MIB::s3AgentBaudRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.2.4.8.1 i <value>
Start monitoring SynOptics (Bay Networks/Nortel) Ethernet/Token Ring hubs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-BASIC-ETHTOK-MIB::s3AgentBaudRate OID value, configure state conditions and alerts, and monitor any SynOptics (Bay Networks/Nortel) Ethernet/Token Ring hubs from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2 | s3SnmpAgent | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2.4 | s3AgentHw | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2.4.8 | s3AgentBaudRate | SYNOPTICS-BASIC-ETHTOK-MIB |