All MIBs › SYMME1T1 › eT1InputZeroSupprV1
eT1InputZeroSupprV1
Module: SYMME1T1
OID (symbolic): SYMME1T1::eT1InputZeroSupprV1
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7
Node type: OBJECT-TYPE
Type: ONVALUETYPE
Access: read-write
Description: The number indicates whether zero suppression (ZS) on the input port is enabled or disabled. Valid values are On (1) or Off (2).
What is eT1InputZeroSupprV1?
This object turns zero suppression on or off for this E1/T1 input port. Admins enable this when the line coding in use requires suppressing long runs of zeros to maintain clock recovery on the line, a common requirement for certain T1/E1 line codes. Setting this to On(1) activates zero suppression to prevent loss of clock synchronization from extended strings of zero bits on the incoming signal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7 snmpwalk -v2c -c public <target> SYMME1T1::eT1InputZeroSupprV1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7.1 snmpget -v2c -c public <target> SYMME1T1::eT1InputZeroSupprV1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7.1 s <value>
Start monitoring Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMME1T1::eT1InputZeroSupprV1 OID value, configure state conditions and alerts, and monitor any Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | symmE1T1 | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1 | e1T1input | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2 | e1T1InputConfig | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1 | e1T1InputConfigTable | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1 | e1T1InputConfigEntry | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7 | eT1InputZeroSupprV1 | SYMME1T1 |