All MIBs › SYMME1T1 › e1T1OutputStateV1
e1T1OutputStateV1
Module: SYMME1T1
OID (symbolic): SYMME1T1::e1T1OutputStateV1
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2
Node type: OBJECT-TYPE
Type: PORTSTATETYPE
Access: read-write
Description: E1/T1 output port enable state. Its value can be Enable (1) or Disable (2). Disabling an output port means no output is generated for that port.
What is e1T1OutputStateV1?
This object enables or disables this E1/T1 output port; disabling it means no output signal is generated for that port at all. Admins disable an output port when that timing feed isn't needed, for example to avoid distributing timing to equipment that's been decommissioned. Setting this to Disable(2) stops the port from generating any output signal, distinct from squelching, which is a temporary clock-state condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2 snmpwalk -v2c -c public <target> SYMME1T1::e1T1OutputStateV1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2.1 snmpget -v2c -c public <target> SYMME1T1::e1T1OutputStateV1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2.1 s <value>
Start monitoring Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMME1T1::e1T1OutputStateV1 OID value, configure state conditions and alerts, and monitor any Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | symmE1T1 | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2 | e1T1Output | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2 | e1T1OutputConfig | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1 | e1T1OutputConfigTable | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1 | e1T1OutputConfigEntry | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2 | e1T1OutputStateV1 | SYMME1T1 |