All MIBs › SYMME1T1 › e1T1OutputPortStatusV1
e1T1OutputPortStatusV1
Module: SYMME1T1
OID (symbolic): SYMME1T1::e1T1OutputPortStatusV1
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The port status of the specified E1/T1 output port. Possible values are On (1) and Off (2). 'On' means there is signal on the port. For E1/T1 output port it means the system is in normal tracking mode. 'Off' means there is no signal on the port. For E1/T1 output port it means the output is squelched during some clock states.
What is e1T1OutputPortStatusV1?
This object reports whether the specified E1/T1 output port currently has signal present, shown as On or Off; On means the port is in normal tracking mode, Off means the output is squelched during certain clock states. Admins check this to confirm the output timing feed to downstream equipment is actually active. A status of Off could indicate the clock is in holdover or another state where the output signal is intentionally squelched rather than the port being faulty.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2 snmpwalk -v2c -c public <target> SYMME1T1::e1T1OutputPortStatusV1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2.1 snmpget -v2c -c public <target> SYMME1T1::e1T1OutputPortStatusV1.1
Start monitoring Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMME1T1::e1T1OutputPortStatusV1 OID value, configure state conditions and alerts, and monitor any Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | symmE1T1 | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2 | e1T1Output | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1 | e1T1OutputStatus | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1 | e1T1OutputStatusTable | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1 | e1T1OutputStatusEntry | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2 | e1T1OutputPortStatusV1 | SYMME1T1 |