All MIBs › SYMME1T1 › e1T1OutputLengthV1
e1T1OutputLengthV1
Module: SYMME1T1
OID (symbolic): SYMME1T1::e1T1OutputLengthV1
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Output cable length.
What is e1T1OutputLengthV1?
This object sets the cable length associated with this E1/T1 output port. Admins configure this so the equipment can adjust its line driver's output level or equalization to compensate for signal loss over the actual cable run to the connected device. Setting this to a value reflecting a longer cable run helps ensure the output signal arrives at the correct amplitude at the far end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8 snmpwalk -v2c -c public <target> SYMME1T1::e1T1OutputLengthV1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8.1 snmpget -v2c -c public <target> SYMME1T1::e1T1OutputLengthV1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8.1 i <value>
Start monitoring Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMME1T1::e1T1OutputLengthV1 OID value, configure state conditions and alerts, and monitor any Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | symmE1T1 | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2 | e1T1Output | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2 | e1T1OutputConfig | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1 | e1T1OutputConfigTable | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1 | e1T1OutputConfigEntry | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8 | e1T1OutputLengthV1 | SYMME1T1 |