All MIBs › SYMME1T1 › e1T1InputFrameTypeV1
e1T1InputFrameTypeV1
Module: SYMME1T1
OID (symbolic): SYMME1T1::e1T1InputFrameTypeV1
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2
Node type: OBJECT-TYPE
Type: INPUTE1T1FRAMETYPE
Access: read-write
Description: E1 or T1 input frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type is 2048 kHz
What is e1T1InputFrameTypeV1?
This object sets the E1 or T1 framing format for this input port, choosing among freq1544khz, freq2048khz, ccs, cas, d4, or esf, with 2048 kHz as the default. Admins must match this to the framing actually used by the upstream timing source feeding this port, since a mismatch prevents proper signal interpretation. Setting this to esf(6) configures the port for Extended Superframe T1 framing to match an incoming ESF timing feed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2 snmpwalk -v2c -c public <target> SYMME1T1::e1T1InputFrameTypeV1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2.1 snmpget -v2c -c public <target> SYMME1T1::e1T1InputFrameTypeV1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2.1 s <value>
Start monitoring Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMME1T1::e1T1InputFrameTypeV1 OID value, configure state conditions and alerts, and monitor any Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | symmE1T1 | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1 | e1T1input | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2 | e1T1InputConfig | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1 | e1T1InputConfigTable | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1 | e1T1InputConfigEntry | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2 | e1T1InputFrameTypeV1 | SYMME1T1 |