All MIBs › SYMME1T1 › e1T1InputCRCStateV1
e1T1InputCRCStateV1
Module: SYMME1T1
OID (symbolic): SYMME1T1::e1T1InputCRCStateV1
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3
Node type: OBJECT-TYPE
Type: EnableValue
Access: read-write
Description: CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means the CRC in the SSM is not used.
What is e1T1InputCRCStateV1?
This object enables or disables CRC checking on the incoming SSM for this input port. Admins disable this if the upstream timing source doesn't generate a CRC in its SSM, since leaving CRC checking on for a source that doesn't produce one would cause the SSM to be treated as invalid. Setting this to Disable(2) tells the system not to use the CRC field when validating this input's SSM.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3 snmpwalk -v2c -c public <target> SYMME1T1::e1T1InputCRCStateV1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3.1 snmpget -v2c -c public <target> SYMME1T1::e1T1InputCRCStateV1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3.1 s <value>
Start monitoring Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMME1T1::e1T1InputCRCStateV1 OID value, configure state conditions and alerts, and monitor any Symmetricom E1/T1 telecom interface equipment (line status/alarm/framing monitoring) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | symmE1T1 | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1 | e1T1input | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2 | e1T1InputConfig | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1 | e1T1InputConfigTable | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1 | e1T1InputConfigEntry | SYMME1T1 |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3 | e1T1InputCRCStateV1 | SYMME1T1 |