SWITCH-RMON-MIB :: rHistoryControlInterval

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSWITCH-RMON-MIBrHistoryControlInterval

rHistoryControlInterval

Module: SWITCH-RMON-MIB

OID (symbolic): SWITCH-RMON-MIB::rHistoryControlInterval

OID (numeric): 1.3.6.1.4.1.8886.6.1.22.2.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour).

Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization.

This object may not be modified if the associated historyControlStatus object is equal to valid(1).

What is rHistoryControlInterval?

This read-write value (1-3600 seconds, default 1800) sets how often a new historical sample bucket is taken for this entry. Admins should keep this shorter than the time it'd take any of the sampled counters to overflow, particularly the octets counter on a busy Ethernet link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.22.2.1.1.5
snmpwalk -v2c -c public <target> SWITCH-RMON-MIB::rHistoryControlInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.22.2.1.1.5.1
snmpget -v2c -c public <target> SWITCH-RMON-MIB::rHistoryControlInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.22.2.1.1.5.1 i <value>

Start monitoring Raisecom Ethernet switch (RMON traffic-statistics/history collection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-RMON-MIB::rHistoryControlInterval OID value, configure state conditions and alerts, and monitor any Raisecom Ethernet switch (RMON traffic-statistics/history collection) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.22rmonMibSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.2rHistorySWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.2.1rHistoryControlTableSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.2.1.1rHistoryControlEntrySWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.2.1.1.5rHistoryControlIntervalSWITCH-RMON-MIB