SWITCH-RMON-MIB :: rEtherStatsOctets

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSWITCH-RMON-MIBrEtherStatsOctets

rEtherStatsOctets

Module: SWITCH-RMON-MIB

OID (symbolic): SWITCH-RMON-MIB::rEtherStatsOctets

OID (numeric): 1.3.6.1.4.1.8886.6.1.22.1.1.1.4

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

This object can be used as a reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows:

Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000

The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.

What is rEtherStatsOctets?

This counter tracks the total octets of data received on the segment, including bad packets, excluding framing bits but including FCS. Sampled before and after a fixed interval, the delta lets an admin estimate Ethernet utilization percentage for that interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.22.1.1.1.4
snmpwalk -v2c -c public <target> SWITCH-RMON-MIB::rEtherStatsOctets

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.22.1.1.1.4.1
snmpget -v2c -c public <target> SWITCH-RMON-MIB::rEtherStatsOctets.1

Start monitoring Raisecom Ethernet switch (RMON traffic-statistics/history collection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-RMON-MIB::rEtherStatsOctets OID value, configure state conditions and alerts, and monitor any Raisecom Ethernet switch (RMON traffic-statistics/history collection) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.22rmonMibSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1rStatisticsSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1.1rEtherStatsTableSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1.1.1rEtherStatsEntrySWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1.1.1.4rEtherStatsOctetsSWITCH-RMON-MIB