SWITCH-RMON-MIB :: rEtherStatsCRCAlignErrors

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSWITCH-RMON-MIBrEtherStatsCRCAlignErrors

rEtherStatsCRCAlignErrors

Module: SWITCH-RMON-MIB

OID (symbolic): SWITCH-RMON-MIB::rEtherStatsCRCAlignErrors

OID (numeric): 1.3.6.1.4.1.8886.6.1.22.1.1.1.8

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

What is rEtherStatsCRCAlignErrors?

This counter tracks packets between 64 and 1518 octets that had either a bad Frame Check Sequence with an integral octet count or a bad FCS with a non-integral count (alignment error). A rising count typically points to a bad cable, connector, or duplex mismatch on that segment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.22.1.1.1.8
snmpwalk -v2c -c public <target> SWITCH-RMON-MIB::rEtherStatsCRCAlignErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.22.1.1.1.8.1
snmpget -v2c -c public <target> SWITCH-RMON-MIB::rEtherStatsCRCAlignErrors.1

Start monitoring Raisecom Ethernet switch (RMON traffic-statistics/history collection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-RMON-MIB::rEtherStatsCRCAlignErrors OID value, configure state conditions and alerts, and monitor any Raisecom Ethernet switch (RMON traffic-statistics/history collection) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.22rmonMibSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1rStatisticsSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1.1rEtherStatsTableSWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1.1.1rEtherStatsEntrySWITCH-RMON-MIB
1.3.6.1.4.1.8886.6.1.22.1.1.1.8rEtherStatsCRCAlignErrorsSWITCH-RMON-MIB