All MIBs › SWITCH-PORTMIRROR-MIB › rcPortMirrorEnable
rcPortMirrorEnable
Module: SWITCH-PORTMIRROR-MIB
OID (symbolic): SWITCH-PORTMIRROR-MIB::rcPortMirrorEnable
OID (numeric): 1.3.6.1.4.1.8886.6.1.4.1.2
Node type: OBJECT-TYPE
Type: EnableVar
Access: read-write
Description: Enable or disable port mirroring.
What is rcPortMirrorEnable?
This value enables or disables port mirroring on the switch as a whole. Admins turn it on before configuring the source and destination ports for a mirroring session, and off when the diagnostic capture is complete. The default is disable, but an admin troubleshooting a suspected traffic issue would set this to enable before configuring rcIngressMirrorPorts or rcEgressMirrorPorts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.4.1.2 snmpwalk -v2c -c public <target> SWITCH-PORTMIRROR-MIB::rcPortMirrorEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.4.1.2.1 snmpget -v2c -c public <target> SWITCH-PORTMIRROR-MIB::rcPortMirrorEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.4.1.2.1 s <value>
Start monitoring Raisecom managed Ethernet switch (port mirroring/SPAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-PORTMIRROR-MIB::rcPortMirrorEnable OID value, configure state conditions and alerts, and monitor any Raisecom managed Ethernet switch (port mirroring/SPAN config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.4 | rcPortMirror | SWITCH-PORTMIRROR-MIB |
| 1.3.6.1.4.1.8886.6.1.4.1 | rcBaseConfig | SWITCH-PORTMIRROR-MIB |
| 1.3.6.1.4.1.8886.6.1.4.1.2 | rcPortMirrorEnable | SWITCH-PORTMIRROR-MIB |