--MibName=rcPortMirror
-- *****************************************************************
-- RAISECOM-PORTMIRROR-MIB.MIB:  Raisecom Port Mirror MIB file
--
-- May 2004, gaohongwei
--
-- Copyright (c) 1994-2004 by Raisecom, Inc.
-- All rights reserved.
-- 
-- *****************************************************************
SWITCH-PORTMIRROR-MIB  DEFINITIONS ::= BEGIN
 
IMPORTS
        iscomSwitch
                                          FROM RAISECOM-BASE-MIB
        MacAddress,
        RowStatus
                                          FROM SNMPv2-TC    
        PortList,EnableVar,Vlanset		  FROM SWITCH-TC
        MODULE-IDENTITY, OBJECT-TYPE,
        Integer32                         FROM SNMPv2-SMI;
                
	rcPortMirror MODULE-IDENTITY
        LAST-UPDATED    "200412200000Z"
        ORGANIZATION    "Raisecom, Inc."
        CONTACT-INFO
                "       Raise Systems
                        
                Postal: Beijing,
                        China

                   Tel: 86-010-82884499

                E-mail: support@raisecom.com"
        DESCRIPTION
                "description of port mirror object."
                ::= { iscomSwitch 4}   
                
----------------------define groups-------------------------------
	rcBaseConfig		OBJECT IDENTIFIER ::= { rcPortMirror 1 }
	rcIngressMirror     OBJECT IDENTIFIER ::= { rcPortMirror 2 }
   	rcEgressMirror      OBJECT IDENTIFIER ::= { rcPortMirror 3 }

-------------------config some scalar---------------------------    
	rcMirrorToPort OBJECT-TYPE 
        SYNTAX INTEGER 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The monitor port."
        ::= { rcBaseConfig 1}
       
   	rcPortMirrorEnable OBJECT-TYPE 
        SYNTAX EnableVar
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Enable or disable port mirroring."    
        DEFVAL	{ disable }
        ::= { rcBaseConfig 2 }  
           
   	rcBlockNoMirrorTrafficEnable OBJECT-TYPE 
        SYNTAX EnableVar
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "When enabled, all traffic to monitor port is blocked except mirror traffic."
        DEFVAL	{ disable }
        ::= { rcBaseConfig 3 }        
        
   	rcIngressMirrorPorts OBJECT-TYPE 
        SYNTAX PortList 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Ingress Monitored ports mask. Bit mask which selectively allows any port with 
            its corresponding bit set, to be mirrored to the monitor port."
        ::= { rcBaseConfig 4 }
               
   	rcEgressMirrorPorts OBJECT-TYPE 
        SYNTAX PortList 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Egress Monitored ports mask. Bit mask which selectively allows any port with 
            its corresponding bit set, to be mirrored to the monitor port."
        ::= { rcBaseConfig 5 }
     
     rcMirrorPolicyPorts OBJECT-TYPE 
        SYNTAX PortList 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Ingress Policy ports mask. Bit mask. which selectively allows any ports with 
            its corresponding bit set, to be mirrored to the mirror destination port."
        ::= { rcBaseConfig 6 }   
        
      rcMirrorVlans OBJECT-TYPE 
        SYNTAX Vlanset 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Ingress Policy ports mask. Bit mask. which selectively allows any ports with 
            its corresponding bit set, to be mirrored to the mirror destination port."
        ::= { rcBaseConfig 7 }    
        
   	rcIngressMirrorPorts64 OBJECT-TYPE 
        SYNTAX OCTET STRING 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Ingress Monitored ports mask. Bit mask which selectively allows any port with 
            its corresponding bit set, to be mirrored to the monitor port."
        ::= { rcBaseConfig 8 }
               
   	rcEgressMirrorPorts64 OBJECT-TYPE 
        SYNTAX OCTET STRING 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Egress Monitored ports mask. Bit mask which selectively allows any port with 
            its corresponding bit set, to be mirrored to the monitor port."
        ::= { rcBaseConfig 9 }
     
     rcMirrorPolicyPorts64 OBJECT-TYPE 
        SYNTAX OCTET STRING 
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Ingress Policy ports mask. Bit mask. which selectively allows any ports with 
            its corresponding bit set, to be mirrored to the mirror destination port."
        ::= { rcBaseConfig 10 }   



------------------ for Ingress port mirror----------------------------   
           
   rcIngressMirrorFilter OBJECT-TYPE 
        SYNTAX INTEGER	{
        			all(1),
        			dmac(2),
        			smac(3)
        			}
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Set ingress mirror filter rule. all: mirror all frames from mirroring ports; 
            damc: mirror all received frames with destination address equal with ingress MAC;
            samc: mirror all received frames with source address equal with ingress MAC."
        DEFVAL	{ all }
        ::= { rcIngressMirror 1 } 
          
   rcIngressMirrorDivider OBJECT-TYPE 
        SYNTAX Integer32 ( 1..1023 )
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Receive frames that have passed the ingress mirror filter rule can further be pruned 
            to reduce the overall number of frames returned to the monitor port. Frames that 
            pass the ingress mirror filter rule are further divided by the value that user sets, 
            so that only one in n frames(1/n of frames, where n='value') are mirrored." 
        ::= { rcIngressMirror 2 }  
               
   rcIngressMirrorMacAddress OBJECT-TYPE 
        SYNTAX MacAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "MAC address that is compared against ingress frames in accordance with the 
            ingress mirror filter rules."
        ::= { rcIngressMirror 3 }

------------------ for Egress port mirror----------------------------          
   rcEgressMirrorFilter OBJECT-TYPE 
        SYNTAX INTEGER	{
        			all(1),
        			dmac(2),
        			smac(3)
        			}
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Set egress mirror filter rule. all: mirror all frames from mirroring ports; 
            damc: mirror all received frames with destination address equal with egress MAC;
            samc: mirror all received frames with source address equal with egress MAC."
        DEFVAL	{ all }
        ::= { rcEgressMirror 1 } 
          
   rcEgressMirrorDivider OBJECT-TYPE 
        SYNTAX Integer32 ( 1..1023 )
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Receive frames that have passed the egress mirror filter rule can further be pruned 
            to reduce the overall number of frames returned to the monitor port. Frames that 
            pass the egress mirror filter rule are further divided by the value that user sets, 
            so that only one in n frames(1/n of frames, where n='value') are mirrored."       
        ::= { rcEgressMirror 2 }  
             
   rcEgressMirrorMacAddress OBJECT-TYPE 
        SYNTAX MacAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "MAC address that is compared against ingress frames in accordance with the 
            egress mirror filter rules."       
        ::= { rcEgressMirror 3 }  
END