All MIBs › SWITCH-PORTMIRROR-MIB › rcMirrorToPort
rcMirrorToPort
Module: SWITCH-PORTMIRROR-MIB
OID (symbolic): SWITCH-PORTMIRROR-MIB::rcMirrorToPort
OID (numeric): 1.3.6.1.4.1.8886.6.1.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The monitor port.
What is rcMirrorToPort?
This value sets which switch port serves as the monitor port that receives copies of mirrored traffic. Admins configure it to designate the port where a packet analyzer or IDS is physically connected to capture the mirrored frames. An admin might set this to port 24 to designate that port as the destination for a network sniffer capturing mirrored traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.4.1.1 snmpwalk -v2c -c public <target> SWITCH-PORTMIRROR-MIB::rcMirrorToPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.4.1.1.1 snmpget -v2c -c public <target> SWITCH-PORTMIRROR-MIB::rcMirrorToPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.4.1.1.1 i <value>
Start monitoring Raisecom managed Ethernet switch (port mirroring/SPAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-PORTMIRROR-MIB::rcMirrorToPort OID value, configure state conditions and alerts, and monitor any Raisecom managed Ethernet switch (port mirroring/SPAN config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.4 | rcPortMirror | SWITCH-PORTMIRROR-MIB |
| 1.3.6.1.4.1.8886.6.1.4.1 | rcBaseConfig | SWITCH-PORTMIRROR-MIB |
| 1.3.6.1.4.1.8886.6.1.4.1.1 | rcMirrorToPort | SWITCH-PORTMIRROR-MIB |