SWITCH-PORTMIRROR-MIB :: rcIngressMirrorFilter

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SWITCH-PORTMIRROR-MIB › rcIngressMirrorFilter

rcIngressMirrorFilter

Module: SWITCH-PORTMIRROR-MIB

OID (symbolic): SWITCH-PORTMIRROR-MIB::rcIngressMirrorFilter

OID (numeric): 1.3.6.1.4.1.8886.6.1.4.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set ingress mirror filter rule. all: mirror all frames from mirroring ports; damc: mirror all received frames with destination address equal with ingress MAC; samc: mirror all received frames with source address equal with ingress MAC.

What is rcIngressMirrorFilter?

This enumerated value sets the filtering rule applied to ingress-mirrored frames: all(1) mirrors every frame from the mirrored ports, dmac(2) mirrors only frames whose destination MAC matches rcIngressMirrorMacAddress, and smac(3) mirrors only frames whose source MAC matches it. Admins narrow the mirror capture to a specific MAC address's traffic instead of flooding the analyzer with all ingress traffic. Setting this to smac(3) along with a specific address in rcIngressMirrorMacAddress captures only ingress frames originating from that one device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.4.2.1
snmpwalk -v2c -c public <target> SWITCH-PORTMIRROR-MIB::rcIngressMirrorFilter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.4.2.1.1
snmpget -v2c -c public <target> SWITCH-PORTMIRROR-MIB::rcIngressMirrorFilter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.4.2.1.1 i <value>

Start monitoring Raisecom managed Ethernet switch (port mirroring/SPAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-PORTMIRROR-MIB::rcIngressMirrorFilter OID value, configure state conditions and alerts, and monitor any Raisecom managed Ethernet switch (port mirroring/SPAN config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.4rcPortMirrorSWITCH-PORTMIRROR-MIB
1.3.6.1.4.1.8886.6.1.4.2rcIngressMirrorSWITCH-PORTMIRROR-MIB
1.3.6.1.4.1.8886.6.1.4.2.1rcIngressMirrorFilterSWITCH-PORTMIRROR-MIB