All MIBs › SUPERMICRO-HEALTH-MIB › smHealthMonitorLowLimit
smHealthMonitorLowLimit
Module: SUPERMICRO-HEALTH-MIB
OID (symbolic): SUPERMICRO-HEALTH-MIB::smHealthMonitorLowLimit
OID (numeric): 1.3.6.1.4.1.10876.2.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Indicates the value for the Low limitation for the Monitor device that are currently in use on the managed device. FAN limit is in unit of RPM, Voltage limit is in unit of mV, Temperture limit is in unit of degree C
What is smHealthMonitorLowLimit?
A read-write integer setting the low alarm threshold for this monitor, applicable to fan (RPM), voltage (mV), or temperature (degrees Celsius) sensors. This is the floor value an admin configures to trigger an alert when a monitored value drops too low, such as a fan spinning too slowly, indicating imminent failure. An admin might set a fan's low limit to 500 RPM so an alarm fires if that fan slows down significantly, warning of a failing fan before it stops entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10876.2.1.1.1.1.6 snmpwalk -v2c -c public <target> SUPERMICRO-HEALTH-MIB::smHealthMonitorLowLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10876.2.1.1.1.1.6.1 snmpget -v2c -c public <target> SUPERMICRO-HEALTH-MIB::smHealthMonitorLowLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10876.2.1.1.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> smHealthMonitorLowLimit.1
Start monitoring Supermicro server/motherboard BMC (temperature/fan/voltage sensor health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUPERMICRO-HEALTH-MIB::smHealthMonitorLowLimit OID value, configure state conditions and alerts, and monitor any Supermicro server/motherboard BMC (temperature/fan/voltage sensor health) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10876 | supermicro | SUPERMICRO-SMI |
| 1.3.6.1.4.1.10876.2 | smHealth | SUPERMICRO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10876.2.1 | smHealthMIB | SUPERMICRO-HEALTH-MIB |
| 1.3.6.1.4.1.10876.2.1.1 | smHealthObjects | SUPERMICRO-HEALTH-MIB |
| 1.3.6.1.4.1.10876.2.1.1.1 | smHealthMonitorTable | SUPERMICRO-HEALTH-MIB |
| 1.3.6.1.4.1.10876.2.1.1.1.1 | smHealthMonitorEntry | SUPERMICRO-HEALTH-MIB |
| 1.3.6.1.4.1.10876.2.1.1.1.1.6 | smHealthMonitorLowLimit | SUPERMICRO-HEALTH-MIB |