STORMSHIELD-ASQ-STATS-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › STORMSHIELD-ASQ-STATS-MIB

Organization: Stormshield

Last Updated: 2017-02-20

Category: Firewall / Security Appliance, Stormshield

Description: Monitors Stormshield ASQ deep-packet inspection engine statistics including protocol analysis and rule match counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is STORMSHIELD-ASQ-STATS-MIB?

STORMSHIELD-ASQ-STATS-MIB is a vendor-specific MIB from Stormshield that exposes statistics from the Active Security Qualification (ASQ) engine, the deep-packet-inspection and stateful analysis engine at the core of its next-generation firewall appliances. It covers protocol-analysis counters and rule-match statistics, quantifying how much traffic the ASQ engine has classified, inspected, and matched against configured security rules. Monitoring this MIB gives an administrator insight into the performance and load of the firewall's inspection software, such as inspection throughput and rule-match rates, which helps identify whether the ASQ engine is under heavy load or whether traffic patterns have shifted in a way that warrants attention. It works alongside the companion STORMSHIELD-ALARM-MIB, which raises notifications derived in part from the conditions these statistics track. It is deployed on Stormshield firewall/UTM appliances at network perimeters where deep packet inspection is enabled. Engineers can download the STORMSHIELD-ASQ-STATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in STORMSHIELD-ASQ-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Stormshield next-generation firewall/UTM appliance

Monitoring Examples

No sample objects were available for this MIB, so a concrete monitoring scenario citing real object names cannot be honestly constructed; based on its stated purpose, an admin would typically poll ASQ protocol-analysis and rule-match counters to gauge inspection engine load and detect unusual spikes in blocked or matched traffic.

This MIB depends on

Related MIBs

Imported Objects

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TruthValue

From STORMSHIELD-SMI-MIB

stormshieldMIBOBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using snsASQStatsStatefulPktBlocked OID:

Select a Stormshield next-generation firewall/UTM appliance (ASQ deep-packet-inspection statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type snsASQStatsStatefulPktBlocked into the Find box to locate it in the OID tree, then select it and click OK. The number of stateful packets blocked by the ASQ firewall engine. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Stormshield Appliance Stateful Query (ASQ) statistics MIB for firewalls, tracking packet filtering and security statistics.

Start monitoring Stormshield next-generation firewall/UTM appliance (ASQ deep-packet-inspection statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download STORMSHIELD-ASQ-STATS-MIB