SONUS-TRUNK-GROUP-RESOURCES-MIB

All MIBs › SONUS-TRUNK-GROUP-RESOURCES-MIB

Organization: Sonus Networks, Inc.

Last Updated: 2001-02-03

Category: Sonus Networks

Description: Manages Sonus Networks trunk group resource configuration, capacity, and real-time utilization statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONUS-TRUNK-GROUP-RESOURCES-MIB?

SONUS-TRUNK-GROUP-RESOURCES-MIB is a vendor-specific MIB from Sonus Networks covering trunk group resource configuration and capacity on its softswitch platforms, where a trunk group represents a logical bundle of circuits/channels to a carrier or peer. It exposes system-wide maximums (max RPC/LPCs, CICs, trunk groups, service groups, service-group instances) and a per-trunk-group table with name, profile, and service-group selection. Its monitoring value is largely capacity/configuration status rather than raw hardware faults: tracking how close the live trunk group count is to sonusTgMaxTrunkGroups or sonusTgMaxCics reveals whether the platform is nearing a provisioning ceiling that would block new trunk creation or call routing. It works together with the call-signaling and accounting MIBs (SIP/H.323, accounting services) under the shared Sonus enterprise tree, since trunk groups are the resource pool those protocols route calls through. It is deployed on Sonus GSX/PSX softswitches at carrier interconnect points and enterprise SIP trunking gateways. Engineers can download the SONUS-TRUNK-GROUP-RESOURCES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONUS-TRUNK-GROUP-RESOURCES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonus Networks softswitch (e.g. GSX/PSX series)

Monitoring Examples

A provisioning engineer would poll sonusTgTable/sonusTgEntry, reading sonusTgName, sonusTgProfName, and sonusTgSgSelect to confirm each trunk group is correctly named and mapped to its service-group profile. sonusTgNextIndex and the system maximums sonusTgMaxTrunkGroups and sonusTgMaxSgInstances would be checked before provisioning a new trunk group to ensure capacity remains. sonusTgMaxCics and sonusTgMaxRpcLpcs give the ceiling on circuit identification codes and resource pool allocations that the trunk groups collectively draw from.

What Can Be Monitored

trunk group inventory and naming
trunk group to service-group mapping
system trunk group/CIC capacity limits
resource pool allocation maximums

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From SONUS-COMMON-MIB

sonusEventClass	OBJECT-TYPE
sonusEventDescription	OBJECT-TYPE
sonusEventLevel	OBJECT-TYPE

From SONUS-SMI

sonusResourcesMIBs

OBJECT-IDENTITY

From SONUS-TC

SonusBoolean
SonusName

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR sonusCarrierCode	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.3	DisplayString	read-write	This is the carrier code specified by the sonusCarrierCodeName. There are a maximum of up to 4 digits.
INT sonusCarrierCodeAdminState	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.4	INTEGER	read-write	Allow administrator to disable or enable this carrier code. Once disabled, this carrier code must be enabled to allow calls to proceed again.
sonusCarrierCodeEntry	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1		not-accessible	Each entry lists the name and order of each gateway.
I32 sonusCarrierCodeIndex	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.1	Integer32	read-only	A unique value for each carrier code between 1 and maximum allowed.
SON sonusCarrierCodeName	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.2	SonusName	read-write	The name assigned to this carrier code.
INT sonusCarrierCodeNetworkIdPlan	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.7	INTEGER	read-write	The network identification plan for this carrier code
INT sonusCarrierCodeNetworkIdType	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.6	INTEGER	read-write	The type of network identification for this carrier code
I32 sonusCarrierCodeNextIndex	1.3.6.1.4.1.2879.2.2.3.1.3.2.1	Integer32	read-only	The next valid index to use when creating a new sonusCarrierCodeEntry
sonusCarrierCodeObjects	1.3.6.1.4.1.2879.2.2.3.1.3.2
ROW sonusCarrierCodeRowStatus	1.3.6.1.4.1.2879.2.2.3.1.3.2.2.1.5	RowStatus	read-write	This is for SNMP use.
sonusCarrierCodeTable	1.3.6.1.4.1.2879.2.2.3.1.3.2.2		not-accessible	This is a table containing a list of IP telephony gateways in the network.
sonusCarrierConfigObjects	1.3.6.1.4.1.2879.2.2.3.1.3.1
sonusCarrierObjects	1.3.6.1.4.1.2879.2.2.3.1.3
sonusDestGatewayObjects	1.3.6.1.4.1.2879.2.2.3.1.2.2
sonusDestGatewayStatusObjects	1.3.6.1.4.1.2879.2.2.3.1.2.3
INT sonusGatewayAdminState	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.8	INTEGER	read-write	Allow administrator to disable or enable the connection from this gateway to the remote gateway. All connections to the remote gateways are created with its state disabled. Once disabled, the gateway must be enabled to allow calls to proceed again.
sonusGatewayConfigObjects	1.3.6.1.4.1.2879.2.2.3.1.2.1
sonusGatewayEntry	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1		not-accessible	Each entry lists the name and order of each gateway.
I32 sonusGatewayIndex	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.1	Integer32	read-only	A unique value for each gateway between 1 and maximum allowed.
IP sonusGatewayIpAddress	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.5	IpAddress	read-write	This is signaling Ip address of the gateway.
I32 sonusGatewayMaxConn	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.7	Integer32	read-write	This is the maximum connections allowed for this gateway to the remote gateway specified by the sonusGatewayName.
SON sonusGatewayName	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.2	SonusName	read-write	The name of the IP Telephony gateway.
I32 sonusGatewayNextIndex	1.3.6.1.4.1.2879.2.2.3.1.2.2.1	Integer32	read-only	The next valid index to use when creating a new sonusGatewayEntry
sonusGatewayObjects	1.3.6.1.4.1.2879.2.2.3.1.2
I32 sonusGatewayPortNum	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.6	Integer32	read-write	This is the port number assigned for the signaling Ip address of the gateway (default is Sonus registered port 2569).
STR sonusGatewayProfName	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.3	DisplayString	read-write	The name of the profile applied to this gateway entry.
ROW sonusGatewayRowStatus	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.9	RowStatus	read-write	This is for SNMP use.
sonusGatewayTable	1.3.6.1.4.1.2879.2.2.3.1.2.2.2		not-accessible	This is a table containing a list of IP telephony gateways in the network.
INT sonusGatewayType	1.3.6.1.4.1.2879.2.2.3.1.2.2.2.1.4	INTEGER	read-write	The type of gateway.
I32 sonusGwCurrConnections	1.3.6.1.4.1.2879.2.2.3.1.2.3.3.1.2	Integer32	read-only	The Current number of connections between this gateway and the remote gateway.
sonusGwStatusEntry	1.3.6.1.4.1.2879.2.2.3.1.2.3.3.1		not-accessible	Each entry lists the current connections and order of each gateway.
I32 sonusGwStatusIndex	1.3.6.1.4.1.2879.2.2.3.1.2.3.3.1.1	Integer32	read-only	A unique value for each gateway between 1 and maximum allowed.
sonusGwStatusTable	1.3.6.1.4.1.2879.2.2.3.1.2.3.3		not-accessible	This is a table containing a list of IP telephony gateways in the network.
SON sonusTg800Translate	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.6	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that may require 800 number translation for the called number.
I32 sonusTgAccCurrentACL	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.8	Integer32	read-only	Current congestion level for the Trunk Group
INT sonusTgAction	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.14	INTEGER	read-write	The action for the operation mode for this trunk.
INT sonusTgAdminState	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.12	INTEGER	read-write	Administrative state to disable or enable a trunk group. All trunk groups are created with its state disabled. If trunk group is disabled, the trunk group must be enabled to allow calls to proceed.
SON sonusTgCallingNumVerify	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.7	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that requires verification for the calling number.
STR sonusTgCarrier	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.10	DisplayString	read-write	This is only meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.
INT sonusTgCirResvState	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.17	INTEGER	read-write	Administrative state to disable or enable the circuit reservation feature on a trunk group. All trunk groups are created with this feature disabled. If this feature is enabled, the sonusTgInboundReserved feature is overriden automatically.
sonusTgEntry	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1		not-accessible	Each sonusTgEntry containing configuration objects. Rules & Behaviors: A sonusTgEntry cannot be deleted when it is enabled. When disabling the trunk group entry, it must not have any associated SGs. All SGs must be removed before disabling the trunk group. A sonusTgEntry cannot be modified when it is enabled.
I32 sonusTgInboundReserved	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.8	Integer32	read-write	This is only meaninful for PSTN Trunk Groups. This the percent of channels reserved for handling inbound calls. Default is 0% and valid for both direction type trunks. The amount reserved is round off to next number. For example, 50% of 23 hannels is 12.5 or 13 channels. Percentage selection allowed in 5% increments.
I32 sonusTgIncomingCallReserve	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.19	Integer32	read-write	The minimum number of incoming call allowed set for this trunk group when sonusTgCirResvState is set to enabled.
I32 sonusTgIndex	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.1	Integer32	read-only	A unique value for each trunk group that is between 1 and maximum allowed
STR sonusTgIsupNode	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.11	DisplayString	read-write	This is meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.
SON sonusTgIsupOnly	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.9	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that is either an ISUP only or mixed of ISUP and other PSTN types
SON sonusTgLnpTranslate	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.5	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that may require LNP translation for the called number.
I32 sonusTgMaxCarrierCodes	1.3.6.1.4.1.2879.2.2.3.1.3.1.1	Integer32	read-write	Maximum number of Carrier Codes for this gateway.
I32 sonusTgMaxCics	1.3.6.1.4.1.2879.2.2.3.1.1.1.2	Integer32	read-write	Maximum number of CICs for this gateway.
I32 sonusTgMaxGateways	1.3.6.1.4.1.2879.2.2.3.1.2.1.1	Integer32	read-write	Maximum allowable destination or remote gateways in the configuration.
I32 sonusTgMaxRpcLpcs	1.3.6.1.4.1.2879.2.2.3.1.1.1.1	Integer32	read-write	Maximum number of RPC-LPC pairs for this gateway.
I32 sonusTgMaxServiceGroups	1.3.6.1.4.1.2879.2.2.3.1.1.1.4	Integer32	read-write	Maximum number of Service Groups for this gateway.
I32 sonusTgMaxSgInstances	1.3.6.1.4.1.2879.2.2.3.1.1.1.5	Integer32	read-write	Maximum number of Service Group Instances for this gateway.
I32 sonusTgMaxTrunkGroups	1.3.6.1.4.1.2879.2.2.3.1.1.1.3	Integer32	read-write	Maximum number of trunk groups for this gateway.
INT sonusTgMode	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.13	INTEGER	read-write	The operation mode for this trunk.
SON sonusTgName	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.2	SonusName	read-write	The name of the trunk group.
I32 sonusTgNextIndex	1.3.6.1.4.1.2879.2.2.3.1.1.2.1	Integer32	read-only	The next valid index to use when creating a new sonusTgEntry
sonusTgObjects	1.3.6.1.4.1.2879.2.2.3.1.1.2
INT sonusTgOperState	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.2	INTEGER	read-only	Current operational state of the trunk group.
I32 sonusTgOutgoingCallReserve	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.20	Integer32	read-write	The minimum percent of outgoing call allowed set for this trunk group when sonusTgCirResvState is set to enabled.
I32 sonusTgPriorityCallReserve	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.18	Integer32	read-write	The minimum number of priority call allowed set for this trunk group when sonusTgCirResvState is set to enabled.
I32 sonusTgPriorityCallUsage	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.9	Integer32	read-only	This is only meaningful for ISUP trunk groups that are configured and when sonusTgCirResvState is enabled. This reflects the current priority usage count of this trunk group.
INT sonusTgProf800TranslateState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.15	INTEGER	read-write	Indicates whether sonusTgProfile800Translate object is present in this profile
INT sonusTgProfCallingNumVerifyState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.16	INTEGER	read-write	Indicates whether sonusTgProfileCallingNumVerify object is present in this profile
INT sonusTgProfCarrierState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.18	INTEGER	read-write	Indicates whether sonusTgProfileCarrier object is present in this profile
SON sonusTgProfile800Translate	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.7	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that may require 800 number translation for the called number.
INT sonusTgProfileAdminState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.4	INTEGER	read-write	Administrator state to use a trunk group Profile. All trunk group profiles are created with its state disabled. When disabled, the profile must be enabled to allowed to be used.
SON sonusTgProfileCallingNumVerify	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.8	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that requires verification for the calling number.
STR sonusTgProfileCarrier	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.10	DisplayString	read-write	This is only meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.
sonusTgProfileEntry	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1		not-accessible	Each sonusTgProfileEntry containing configuration objects. Rules & Behaviors: A sonusTgProfileEntry cannot be deleted when it is enabled. When disabling the trunk group entry, it must not have any associated SGs. All SGs must be removed before disabling the trunk group. A sonusTgProfileEntry cannot be modified when it is enabled.
I32 sonusTgProfileInboundReserved	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.5	Integer32	read-write	This is only meaninful for PSTN Trunk Groups. This the percent of channels reserved for handling inbound calls. Default is 0% and valid for both direction type trunks. The amount reserved is round off to next number. For example, 50% of 23 hannels is 12.5 or 13 channels. Percentage selection allowed in 5% increments.
I32 sonusTgProfileIndex	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.1	Integer32	read-only	A unique value for each trunk group profile that is between 1 and maximum allowed
STR sonusTgProfileIsupNode	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.11	DisplayString	read-write	This is only meaningful for PSTN trunk groups and is specific to Isup only. This is the name of the Isup that this trunk group is bound to.
SON sonusTgProfileIsupOnly	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.9	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that is either an ISUP only or mixed of ISUP and other PSTN types
SON sonusTgProfileLnpTranslate	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.6	SonusBoolean	read-write	This is only meaningful for PSTN trunk groups that may require LNP translation for the called number.
SON sonusTgProfileName	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.2	SonusName	read-write	The name of this trunk group Profile.
I32 sonusTgProfileNextIndex	1.3.6.1.4.1.2879.2.2.3.1.1.5.5	Integer32	read-only	The next valid index to use when creating a new sonusTgProfileEntry
sonusTgProfileObjects	1.3.6.1.4.1.2879.2.2.3.1.1.5
ROW sonusTgProfileRowStatus	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.20	RowStatus	read-write	This is for SNMP use.
INT sonusTgProfileSgSelect	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.3	INTEGER	read-write	Selection for hunting within a PSTN trunk group that has more than 1 associated service group(SG). It is based on cost associated with each SG, how the SG is ordered during configuration (for circular also). If either circular option is chosen, then SG hunt algorithm is ignored.
sonusTgProfileTable	1.3.6.1.4.1.2879.2.2.3.1.1.5.6		not-accessible	A list of trunk group entries.
INT sonusTgProfInboundReservedState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.13	INTEGER	read-write	Indicates whether sonusTgProfileInboundReserved object is present in this profile
INT sonusTgProfIsupNodeState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.19	INTEGER	read-write	Indicates whether sonusTgProfileIsupNode object is present in this profile
INT sonusTgProfIsupOnlyState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.17	INTEGER	read-write	Indicates whether sonusTgProfileIsupOnly object is present in this profile
INT sonusTgProfLnpTranslateState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.14	INTEGER	read-write	Indicates whether sonusTgProfileLnpTranslate object is present in this profile
STR sonusTgProfName	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.3	DisplayString	read-write	The name of the profile applied to this trunk group entry.
INT sonusTgProfSgSelectState	1.3.6.1.4.1.2879.2.2.3.1.1.5.6.1.12	INTEGER	read-write	Indicates whether sonusTgProfileSgSelect object is present in this profile
I32 sonusTgPstnInboundUsage	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.5	Integer32	read-only	This is only meaningful for PSTN trunk groups that are configured for inbound or both directions. This reflects the current inbound or incoming usage count of this trunk group.
I32 sonusTgPstnOutboundUsage	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.6	Integer32	read-only	This is only meaningful for PSTN trunk groups that are configured for outbound or both directions. This reflects the current outbound, outgoing or non-priority usage count of this trunk group.
I32 sonusTgPstnTotalAvailable	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.3	Integer32	read-only	The sum of all available or unblocked PSTN channels for this trunk group.
I32 sonusTgPstnTotalConfigured	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.7	Integer32	read-only	The sum of all configured and registered PSTN channels for this trunk group.
I32 sonusTgPstnTotalInboundRsv	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.4	Integer32	read-only	This is meaningful for PSTN trunk groups that are configured for inbound or both directions only. This is the reserved count as specified by the percentage configred for this trunk group.
ROW sonusTgRowStatus	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.16	RowStatus	read-write	This is for SNMP use.
sonusTgSgEntry	1.3.6.1.4.1.2879.2.2.3.1.1.4.1		not-accessible	Each entry lists the name and order of each service group.
I32 sonusTgSgIndex	1.3.6.1.4.1.2879.2.2.3.1.1.4.1.2	Integer32	read-only	A unique value for each service group in this trunk group
STR sonusTgSgName	1.3.6.1.4.1.2879.2.2.3.1.1.4.1.3	DisplayString	read-only	The name of the service group.
INT sonusTgSgSelect	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.4	INTEGER	read-write	Selection for hunting within a PSTN trunk group that has more than 1 associated service group(SG). It is either based on cost associated with each SG, how the SG is ordered during configuration (for circular also). If either circular option is chosen, then SG hunt algorithm is ignored.
sonusTgSgTable	1.3.6.1.4.1.2879.2.2.3.1.1.4		not-accessible	This is a virtual table containing a list of service groups that belong to the same trunk group. This is a doubly indexed table so that further details about each service group may be queried by name.
I32 sonusTgSgTgIndex	1.3.6.1.4.1.2879.2.2.3.1.1.4.1.1	Integer32	read-only	The Trunk Group index that has the following set of Service Groups.
INT sonusTgSgType	1.3.6.1.4.1.2879.2.2.3.1.1.4.1.4	INTEGER	read-only	The type of the service group.
sonusTgStatusEntry	1.3.6.1.4.1.2879.2.2.3.1.1.3.1		not-accessible	Each entry describes the current status of a PSTN trunk group.
I32 sonusTgStatusIndex	1.3.6.1.4.1.2879.2.2.3.1.1.3.1.1	Integer32	read-only	A unique value for each trunk group between 1 and maximum allowed.
sonusTgStatusTable	1.3.6.1.4.1.2879.2.2.3.1.1.3		not-accessible	This table contains status information of a PSTN trunk group. There may not be any SG registered to a trunk group in which case all statistics will be zero.
sonusTgTable	1.3.6.1.4.1.2879.2.2.3.1.1.2.2		not-accessible	A list of trunk group entries.
I32 sonusTgTimeout	1.3.6.1.4.1.2879.2.2.3.1.1.2.2.1.15	Integer32	read-write	Timeout value in minutes for the dry up action.
sonusTrunkConfigObjects	1.3.6.1.4.1.2879.2.2.3.1.1.1
NTF sonusTrunkDeletedNotification	1.3.6.1.4.1.2879.2.2.3.2.0.5			This trap indicates a Trunk Group is now deleted.
NTF sonusTrunkDisabledNotification	1.3.6.1.4.1.2879.2.2.3.2.0.2			This trap indicates a Trunk Group is now disabled.
NTF sonusTrunkEnabledNotification	1.3.6.1.4.1.2879.2.2.3.2.0.1			This trap indicates a Trunk Group is now enabled.
sonusTrunkGroupResourcesMIB	1.3.6.1.4.1.2879.2.2.3			The MIB Module for Trunk Group Resources Management.
sonusTrunkGroupResourcesMIBNotifications	1.3.6.1.4.1.2879.2.2.3.2
sonusTrunkGroupResourcesMIBNotificationsObjects	1.3.6.1.4.1.2879.2.2.3.2.1
sonusTrunkGroupResourcesMIBNotificationsPrefix	1.3.6.1.4.1.2879.2.2.3.2.0
sonusTrunkGroupResourcesMIBObjects	1.3.6.1.4.1.2879.2.2.3.1
NTF sonusTrunkInServiceNotification	1.3.6.1.4.1.2879.2.2.3.2.0.3			This trap indicates a Trunk Group is now in service.
sonusTrunkObjects	1.3.6.1.4.1.2879.2.2.3.1.1
NTF sonusTrunkOutOfServiceNotification	1.3.6.1.4.1.2879.2.2.3.2.0.4			This trap indicates that a Trunk Group is out of service.
INT sonusTrunkOutOfServiceReason	1.3.6.1.4.1.2879.2.2.3.2.1.1	INTEGER	read-only	The reason why the Trunk Group is out of service.

RFC description

Manages trunk group resources and RPC-LPC pairs on Sonus voice gateway platforms.

Start monitoring Sonus Networks softswitch, e.g. GSX/PSX series (trunk-group capacity/configuration status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONUS-TRUNK-GROUP-RESOURCES-MIB

What Is SONUS-TRUNK-GROUP-RESOURCES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description