All MIBs › SONUS-SONET-APS-MIB › sonusApsGroupOperStatus
sonusApsGroupOperStatus
Module: SONUS-SONET-APS-MIB
OID (symbolic): SONUS-SONET-APS-MIB::sonusApsGroupOperStatus
OID (numeric): 1.3.6.1.4.1.2879.2.5.9.1.2.1.12
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The current status of the APS group.
Bit 0 - Extra Traffic. Indicates that extra traffic is currently being accepted on the protection line.
Bit 1 - Protection Switching Byte Defect. Indicates that either an inconsistent APS byte or an invalid code has been detected.
Bit 2 - Channel Mismatch. Indicates that a mismatch between the transmitted K1 channel and the received K2 channel has been detected.
Bit 3 - APS Mode Mismatch. Indicates a conflict between the current local mode and the received K2 mode information. Modes other than 1+1 unidirectional monitor protection line: K2 bit 5 indicates the architecture; K2 bits 6-8 indicate if the mode is unidirectional or bidirectional.
Bit 4 - Far-End Protection-Line Defect. Indicates the LTE received an SF code for the protection line, which means that the far-end LTE is no longer receiving its request, or (in bidirectional operation) the far-end LTE considers the near-end LTE's request to be invalid.
What is sonusApsGroupOperStatus?
Read-only BITS reporting the current condition of this APS group across five flags (extra traffic active, protection-switching byte defect, channel mismatch, mode mismatch, far-end protection-line defect), giving an admin a compact snapshot of protection-switching health.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2879.2.5.9.1.2.1.12 snmpwalk -v2c -c public <target> SONUS-SONET-APS-MIB::sonusApsGroupOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2879.2.5.9.1.2.1.12.1 snmpget -v2c -c public <target> SONUS-SONET-APS-MIB::sonusApsGroupOperStatus.1
Start monitoring Sonus Networks media gateway/softswitch with SONET interfaces (linear APS protection-group status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SONUS-SONET-APS-MIB::sonusApsGroupOperStatus OID value, configure state conditions and alerts, and monitor any Sonus Networks media gateway/softswitch with SONET interfaces (linear APS protection-group status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2879 | sonus | SONUS-SMI |
| 1.3.6.1.4.1.2879.2 | sonusMgmt | SONUS-SMI |
| 1.3.6.1.4.1.2879.2.5 | sonusServicesMIBs | SONUS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2879.2.5.9 | sonusSonetApsMIB | SONUS-SONET-APS-MIB |
| 1.3.6.1.4.1.2879.2.5.9.1 | sonusSonetApsMIBObjects | SONUS-SONET-APS-MIB |
| 1.3.6.1.4.1.2879.2.5.9.1.2 | sonusApsGroupTable | SONUS-SONET-APS-MIB |
| 1.3.6.1.4.1.2879.2.5.9.1.2.1 | sonusApsGroupEntry | SONUS-SONET-APS-MIB |
| 1.3.6.1.4.1.2879.2.5.9.1.2.1.12 | sonusApsGroupOperStatus | SONUS-SONET-APS-MIB |