All MIBs › SONUS-NODE-MIB › sonusBparamParamMode
sonusBparamParamMode
Module: SONUS-NODE-MIB
OID (symbolic): SONUS-NODE-MIB::sonusBparamParamMode
OID (numeric): 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the binary parameter file mode of the node. This mode specifies whether the node will attempt to load a binary parameter file. The paramMode can be set to disabled(1) which disables parameter file loading. The mode can be set to defaults(3), which temporarily disables binary parameter file loading, until after the next binary parameter file save cycle initiated by the runtime software. In both of these disabled cases, the node boots with default parameters and automatically loads and executes the CLI startup script. The paramMode may be set to binaryFile(2), which enables binary parameter file loading and disables the automatic CLI startup script loading.
A binary parameter file must exist before the node can succesfully load a binary parameter file. The node will load default parameters when a valid parameter file can not be loaded. The node loads default parameters when either the parameter mode is set to disabled(1) or when the mode is set to defaults(3). When the mode is set to defaults(3), the mode is automatically updated to binaryFile(2) on the first parameter save cycle.
What is sonusBparamParamMode?
Specifies whether the node attempts to load a saved binary parameter file at boot: disabled(1) skips loading entirely, binaryFile(2) loads the saved file, defaults(3) intentionally boots with factory defaults. An admin sets this to defaults(3) when deliberately wiping configuration to recover from a corrupted parameter file, understanding the node will boot clean rather than restoring saved settings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41 snmpwalk -v2c -c public <target> SONUS-NODE-MIB::sonusBparamParamMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41.1 snmpget -v2c -c public <target> SONUS-NODE-MIB::sonusBparamParamMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41.1 i <value>
Start monitoring Sonus Networks softswitch/media gateway node (shelf presence/power/management status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SONUS-NODE-MIB::sonusBparamParamMode OID value, configure state conditions and alerts, and monitor any Sonus Networks softswitch/media gateway node (shelf presence/power/management status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2879 | sonus | SONUS-SMI |
| 1.3.6.1.4.1.2879.2 | sonusMgmt | SONUS-SMI |
| 1.3.6.1.4.1.2879.2.1 | sonusSystemMIBs | SONUS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2879.2.1.1 | sonusNodeMIB | SONUS-NODE-MIB |
| 1.3.6.1.4.1.2879.2.1.1.1 | sonusNodeMIBObjects | SONUS-NODE-MIB |
| 1.3.6.1.4.1.2879.2.1.1.1.2 | sonusNvsConfig | SONUS-NODE-MIB |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1 | sonusNvsConfigTable | SONUS-NODE-MIB |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1 | sonusNvsConfigEntry | SONUS-NODE-MIB |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41 | sonusBparamParamMode | SONUS-NODE-MIB |