SOCOMECUPS-MIB :: upsDeepBatteryCalibration

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SOCOMECUPS-MIB › upsDeepBatteryCalibration

upsDeepBatteryCalibration

Module: SOCOMECUPS-MIB

OID (symbolic): SOCOMECUPS-MIB::upsDeepBatteryCalibration

OID (numeric): 1.3.6.1.4.1.4555.1.1.1.1.7.7.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The system is placed on battery to a discharge level, set by the manufacturer, sufficient to determine battery replacement and battery run-time with a high degree of confidence. WARNING: this test will leave the battery in a low charge state and will require time for recharging to a level sufficient to provide normal battery duration for the protected load.

What is upsDeepBatteryCalibration?

Runs a deep battery discharge test that determines battery replacement need and run-time with high confidence by discharging the battery to a manufacturer-set level; the source DESCRIPTION explicitly warns this leaves the battery in a low charge state requiring recharge time before it can again provide normal backup duration. Because it temporarily weakens backup protection, admins should only run this during a planned maintenance window, not during periods of unreliable utility power.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4555.1.1.1.1.7.7.5
snmpwalk -v2c -c public <target> SOCOMECUPS-MIB::upsDeepBatteryCalibration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4555.1.1.1.1.7.7.5.1
snmpget -v2c -c public <target> SOCOMECUPS-MIB::upsDeepBatteryCalibration.1

Start monitoring Socomec UPS, power protection equipment (battery/input-output/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SOCOMECUPS-MIB::upsDeepBatteryCalibration OID value, configure state conditions and alerts, and monitor any Socomec UPS, power protection equipment (battery/input-output/alarm status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4555socomecSOCOMECPDU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4555.1softwareSOCOMECUPS-MIB
1.3.6.1.4.1.4555.1.1networkSOCOMECUPS-MIB
1.3.6.1.4.1.4555.1.1.1netvisionSOCOMECUPS-MIB
1.3.6.1.4.1.4555.1.1.1.1upsObjectsSOCOMECUPS-MIB
1.3.6.1.4.1.4555.1.1.1.1.7upsTestSOCOMECUPS-MIB
1.3.6.1.4.1.4555.1.1.1.1.7.7upsWellKnownTestsSOCOMECUPS-MIB
1.3.6.1.4.1.4555.1.1.1.1.7.7.5upsDeepBatteryCalibrationSOCOMECUPS-MIB