All MIBs › SNR-ERD-PRO-Mini › voltageS1
voltageS1
Module: SNR-ERD-PRO-Mini
OID (symbolic): SNR-ERD-PRO-Mini::voltageS1
OID (numeric): 1.3.6.1.4.1.40418.2.5.1.1.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: qwerty
What is voltageS1?
This is the voltage reading from power-monitoring channel 1 on this SNR-ERD unit (the vendor's own DESCRIPTION is just a placeholder "qwerty"). Pair it with currentS1, the current reading for the same channel, to gauge the load on that power feed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.5.1.1.2.1 snmpwalk -v2c -c public <target> SNR-ERD-PRO-Mini::voltageS1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.5.1.1.2.1.1 snmpget -v2c -c public <target> SNR-ERD-PRO-Mini::voltageS1.1
Start monitoring NAG/SNR environmental relay/sensor units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-PRO-Mini::voltageS1 OID value, configure state conditions and alerts, and monitor any NAG/SNR environmental relay/sensor units from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.5 | snr_erd_pro_mini | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.1 | measurements | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.1.1 | snrSensors | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.1.1.2 | powerSensors | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.1.1.2.1 | voltageS1 | SNR-ERD-PRO-Mini |