All MIBs › SNR-ERD-PRO-Mini › smart1State
smart1State
Module: SNR-ERD-PRO-Mini
OID (symbolic): SNR-ERD-PRO-Mini::smart1State
OID (numeric): 1.3.6.1.4.1.40418.2.5.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is smart1State?
Write on(1), off(0), or reset(2) to control the first 'smart' managed output/device on this SNR-ERD unit (the vendor's own DESCRIPTION is just a placeholder "qwerty"). Write reset(2) to power-cycle whatever equipment is wired to smart output 1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.5.3.1 snmpwalk -v2c -c public <target> SNR-ERD-PRO-Mini::smart1State
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.5.3.1.1 snmpget -v2c -c public <target> SNR-ERD-PRO-Mini::smart1State.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.5.3.1.1 i <value>
Start monitoring NAG/SNR environmental relay/sensor units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-PRO-Mini::smart1State OID value, configure state conditions and alerts, and monitor any NAG/SNR environmental relay/sensor units from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.5 | snr_erd_pro_mini | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.3 | management | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.3.1 | smart1State | SNR-ERD-PRO-Mini |