All MIBs › SNR-ERD-PRO-Mini › smart1ResetTime
smart1ResetTime
Module: SNR-ERD-PRO-Mini
OID (symbolic): SNR-ERD-PRO-Mini::smart1ResetTime
OID (numeric): 1.3.6.1.4.1.40418.2.5.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is smart1ResetTime?
This sets a timing value (likely seconds) associated with resetting smart output 1, controlling how long the reset condition (from smart1State's reset(2)) is held before the output returns to its prior state. Tune it to match how long the connected equipment needs to fully power-cycle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.5.3.5 snmpwalk -v2c -c public <target> SNR-ERD-PRO-Mini::smart1ResetTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.5.3.5.1 snmpget -v2c -c public <target> SNR-ERD-PRO-Mini::smart1ResetTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.5.3.5.1 i <value>
Start monitoring NAG/SNR environmental relay/sensor units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-PRO-Mini::smart1ResetTime OID value, configure state conditions and alerts, and monitor any NAG/SNR environmental relay/sensor units from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.5 | snr_erd_pro_mini | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.3 | management | SNR-ERD-PRO-Mini |
| 1.3.6.1.4.1.40418.2.5.3.5 | smart1ResetTime | SNR-ERD-PRO-Mini |