All MIBs › SNR-ERD-4 › smart5ResetTime
smart5ResetTime
Module: SNR-ERD-4
OID (symbolic): SNR-ERD-4::smart5ResetTime
OID (numeric): 1.3.6.1.4.1.40418.2.6.3.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is smart5ResetTime?
This read-write INTEGER sets the duration of the reset pulse applied to smart output channel 5, the last of the five smart channels, when smart5State is set to reset(2). An admin tunes it for that channel's own reset/power-cycle timing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.3.16 snmpwalk -v2c -c public <target> SNR-ERD-4::smart5ResetTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.3.16.1 snmpget -v2c -c public <target> SNR-ERD-4::smart5ResetTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.6.3.16.1 i <value>
Start monitoring NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-4::smart5ResetTime OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6 | snr_erd_4 | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.3 | management | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.3.16 | smart5ResetTime | SNR-ERD-4 |