All MIBs › SNR-ERD-4 › smart1State
smart1State
Module: SNR-ERD-4
OID (symbolic): SNR-ERD-4::smart1State
OID (numeric): 1.3.6.1.4.1.40418.2.6.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is smart1State?
This read-write INTEGER controls the state of "smart" output channel 1 on this SNR-ERD-4 unit: on(1), off(0), or reset(2), parallel to releState but for a separately switchable smart output. An admin uses it to turn that specific output on/off or pulse a reset on it independently of the main relay (releState) and the other smart channels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.3.2 snmpwalk -v2c -c public <target> SNR-ERD-4::smart1State
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.3.2.1 snmpget -v2c -c public <target> SNR-ERD-4::smart1State.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.6.3.2.1 i <value>
Start monitoring NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-4::smart1State OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6 | snr_erd_4 | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.3 | management | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.3.2 | smart1State | SNR-ERD-4 |