All MIBs › SNR-ERD-4 › releResetTime
releResetTime
Module: SNR-ERD-4
OID (symbolic): SNR-ERD-4::releResetTime
OID (numeric): 1.3.6.1.4.1.40418.2.6.3.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is releResetTime?
This read-write INTEGER, under the management branch, sets the duration of the momentary pulse the device applies to the main relay output when releState is set to reset(2). An admin tunes it to control how long the relay stays de-energized during a reset cycle, e.g. for a power-cycle sequence to work reliably.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.3.11 snmpwalk -v2c -c public <target> SNR-ERD-4::releResetTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.3.11.1 snmpget -v2c -c public <target> SNR-ERD-4::releResetTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.6.3.11.1 i <value>
Start monitoring NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-4::releResetTime OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6 | snr_erd_4 | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.3 | management | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.3.11 | releResetTime | SNR-ERD-4 |