All MIBs › SNR-ERD-4 › currentS2
currentS2
Module: SNR-ERD-4
OID (symbolic): SNR-ERD-4::currentS2
OID (numeric): 1.3.6.1.4.1.40418.2.6.1.1.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: qwerty
What is currentS2?
This read-only INTEGER reports the current measured on power-sensor channel 2 of this SNR-ERD-4 unit, paired with voltageS2. An admin polls it to watch the load current drawn on channel 2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.1.1.2.5 snmpwalk -v2c -c public <target> SNR-ERD-4::currentS2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.1.1.2.5.1 snmpget -v2c -c public <target> SNR-ERD-4::currentS2.1
Start monitoring NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-4::currentS2 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6 | snr_erd_4 | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1 | measurements | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1.1 | snrSensors | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1.1.2 | powerSensors | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1.1.2.5 | currentS2 | SNR-ERD-4 |