All MIBs › SNR-ERD-4 › currentS1
currentS1
Module: SNR-ERD-4
OID (symbolic): SNR-ERD-4::currentS1
OID (numeric): 1.3.6.1.4.1.40418.2.6.1.1.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: qwerty
What is currentS1?
This read-only INTEGER, under the device's powerSensors branch, reports the current measured on power-sensor channel 1 of this SNR-ERD-4 unit, paired with voltageS1 for the same channel. An admin polls it to watch the load current drawn on channel 1, e.g. to catch an overcurrent condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.1.1.2.2 snmpwalk -v2c -c public <target> SNR-ERD-4::currentS1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.6.1.1.2.2.1 snmpget -v2c -c public <target> SNR-ERD-4::currentS1.1
Start monitoring NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-4::currentS1 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-4 environmental relay/sensor monitoring device (voltage/temperature sensor and relay status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6 | snr_erd_4 | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1 | measurements | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1.1 | snrSensors | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1.1.2 | powerSensors | SNR-ERD-4 |
| 1.3.6.1.4.1.40418.2.6.1.1.2.2 | currentS1 | SNR-ERD-4 |