All MIBs › SNR-ERD-3 › voltageSensor1Contact10
voltageSensor1Contact10
Module: SNR-ERD-3
OID (symbolic): SNR-ERD-3::voltageSensor1Contact10
OID (numeric): 1.3.6.1.4.1.40418.2.3.4.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: qwerty
What is voltageSensor1Contact10?
The voltage-related reading from the sensor wired to contact 10 (units and scale are not documented in this MIB). An admin polls this to check the electrical condition being measured at input 10, such as a battery or supply rail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.4.3 snmpwalk -v2c -c public <target> SNR-ERD-3::voltageSensor1Contact10
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.4.3.1 snmpget -v2c -c public <target> SNR-ERD-3::voltageSensor1Contact10.1
Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::voltageSensor1Contact10 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.3 | snr_erd_3 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.4 | sensesSet2 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.4.3 | voltageSensor1Contact10 | SNR-ERD-3 |