SNR-ERD-3 :: userSense3Name

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SNR-ERD-3 › userSense3Name

userSense3Name

Module: SNR-ERD-3

OID (symbolic): SNR-ERD-3::userSense3Name

OID (numeric): 1.3.6.1.4.1.40418.2.3.5.7

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: qwerty

What is userSense3Name?

A user-assigned label, up to 10 characters, for the general-purpose sensor on contact 4 (monitorAnySensorSignal3contact4). An admin sets this to a short descriptive name identifying the device wired to that input.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.5.7
snmpwalk -v2c -c public <target> SNR-ERD-3::userSense3Name

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.5.7.1
snmpget -v2c -c public <target> SNR-ERD-3::userSense3Name.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.3.5.7.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> userSense3Name.1

Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::userSense3Name OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.40418snrSNR-ERD-2
1.3.6.1.4.1.40418.2snr_erdSNR-ERD-2
Numeric OIDNameModule
1.3.6.1.4.1.40418.2.3snr_erd_3SNR-ERD-3
1.3.6.1.4.1.40418.2.3.5commSSNR-ERD-3
1.3.6.1.4.1.40418.2.3.5.7userSense3NameSNR-ERD-3