All MIBs › SNR-ERD-3 › sysVoltageAlarm
sysVoltageAlarm
Module: SNR-ERD-3
OID (symbolic): SNR-ERD-3::sysVoltageAlarm
OID (numeric): 1.3.6.1.4.1.40418.2.3.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is sysVoltageAlarm?
A configurable value that controls or reports the system voltage alarm condition tied to voltageSensor1Contact10. An admin sets this to define when the unit should consider the monitored voltage on input 10 to be in an alarm state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.4.4 snmpwalk -v2c -c public <target> SNR-ERD-3::sysVoltageAlarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.4.4.1 snmpget -v2c -c public <target> SNR-ERD-3::sysVoltageAlarm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.3.4.4.1 i <value>
Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::sysVoltageAlarm OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.3 | snr_erd_3 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.4 | sensesSet2 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.4.4 | sysVoltageAlarm | SNR-ERD-3 |