All MIBs › SNR-ERD-3 › sysVoltage2Alarm
sysVoltage2Alarm
Module: SNR-ERD-3
OID (symbolic): SNR-ERD-3::sysVoltage2Alarm
OID (numeric): 1.3.6.1.4.1.40418.2.3.4.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is sysVoltage2Alarm?
A configurable value that controls or reports the system voltage alarm condition tied to voltageSensor2Contact11. An admin sets this to define when the unit should consider the monitored voltage on input 11 to be in an alarm state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.4.6 snmpwalk -v2c -c public <target> SNR-ERD-3::sysVoltage2Alarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.4.6.1 snmpget -v2c -c public <target> SNR-ERD-3::sysVoltage2Alarm.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.3.4.6.1 i <value>
Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::sysVoltage2Alarm OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.3 | snr_erd_3 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.4 | sensesSet2 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.4.6 | sysVoltage2Alarm | SNR-ERD-3 |