All MIBs › SNR-ERD-3 › monitorAnySensorSignal1contact2
monitorAnySensorSignal1contact2
Module: SNR-ERD-3
OID (symbolic): SNR-ERD-3::monitorAnySensorSignal1contact2
OID (numeric): 1.3.6.1.4.1.40418.2.3.3.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is monitorAnySensorSignal1contact2?
Reports the state of a generic binary sensor wired to contact 2: sensorOff(0), sensorIs0(1), sensorIs1(2), or sensorOn(3). An admin uses this general-purpose input to monitor any dry-contact device, such as a leak detector or motion sensor, attached to contact 2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.3.4 snmpwalk -v2c -c public <target> SNR-ERD-3::monitorAnySensorSignal1contact2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.3.4.1 snmpget -v2c -c public <target> SNR-ERD-3::monitorAnySensorSignal1contact2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.3.3.4.1 i <value>
Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::monitorAnySensorSignal1contact2 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.3 | snr_erd_3 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.3 | sensesSet1 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.3.4 | monitorAnySensorSignal1contact2 | SNR-ERD-3 |