All MIBs › SNR-ERD-3 › monitorAlarmSignal2Contact6
monitorAlarmSignal2Contact6
Module: SNR-ERD-3
OID (symbolic): SNR-ERD-3::monitorAlarmSignal2Contact6
OID (numeric): 1.3.6.1.4.1.40418.2.3.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is monitorAlarmSignal2Contact6?
Reports the state of a door/alarm sensor wired to contact 6: sensorOff(0), doorIsClose(1), doorIsOpen(2), or sensorOn(3). An admin polls this as a second, independent door-open/closed sensor input from this monitoring unit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.3.2 snmpwalk -v2c -c public <target> SNR-ERD-3::monitorAlarmSignal2Contact6
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.3.2.1 snmpget -v2c -c public <target> SNR-ERD-3::monitorAlarmSignal2Contact6.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.3.3.2.1 i <value>
Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::monitorAlarmSignal2Contact6 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.3 | snr_erd_3 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.3 | sensesSet1 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.3.2 | monitorAlarmSignal2Contact6 | SNR-ERD-3 |