All MIBs › SNR-ERD-3 › ipMonitoringDevice
ipMonitoringDevice
Module: SNR-ERD-3
OID (symbolic): SNR-ERD-3::ipMonitoringDevice
OID (numeric): 1.3.6.1.4.1.40418.2.3.1.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: monitoredIP
What is ipMonitoringDevice?
The IP address of a remote device this SNR-ERD-3 unit actively monitors (e.g. pings) as part of its environmental/network watchdog function. An admin sets this to have the unit track reachability of a specific piece of equipment in the same rack or room.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.1.3 snmpwalk -v2c -c public <target> SNR-ERD-3::ipMonitoringDevice
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.3.1.3.1 snmpget -v2c -c public <target> SNR-ERD-3::ipMonitoringDevice.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.3.1.3.1 a <value>
Start monitoring NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3::ipMonitoringDevice OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3 environmental relay/monitoring device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.3 | snr_erd_3 | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.1 | ipAddressEntry | SNR-ERD-3 |
| 1.3.6.1.4.1.40418.2.3.1.3 | ipMonitoringDevice | SNR-ERD-3 |