All MIBs › SNR-ERD-2 › monitorVoltageSignal
monitorVoltageSignal
Module: SNR-ERD-2
OID (symbolic): SNR-ERD-2::monitorVoltageSignal
OID (numeric): 1.3.6.1.4.1.40418.2.2.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is monitorVoltageSignal?
Reports whether power is present on the monitored voltage input: voltageIsYes(2) or voltageIsNo(1), with sensorOn(3)/sensorOff(0) indicating whether the voltage-sensing circuit itself is active -- an admin uses this to detect a power loss to equipment this unit is protecting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.2.3.6 snmpwalk -v2c -c public <target> SNR-ERD-2::monitorVoltageSignal
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.2.3.6.1 snmpget -v2c -c public <target> SNR-ERD-2::monitorVoltageSignal.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.2.3.6.1 i <value>
Start monitoring NAG SNR-ERD-2 environmental relay/alarm monitoring unit (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-2::monitorVoltageSignal OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-2 environmental relay/alarm monitoring unit (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2.2 | snr_erd_2 | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2.2.3 | sensesSet1 | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2.2.3.6 | monitorVoltageSignal | SNR-ERD-2 |