All MIBs › SMON-MIB › portCopyStatus
portCopyStatus
Module: SMON-MIB
OID (symbolic): SMON-MIB::portCopyStatus
OID (numeric): 1.3.6.1.2.1.16.22.1.3.1.1.5
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-create
Description: Defines the status of the port copy entry.
In order to configure a source to destination portCopy relationship, both source and destination interfaces MUST be present as an ifEntry in the ifTable and their respective ifAdminStatus and ifOperStatus values MUST be equal to 'up(1)'. If the value of any of those two objects changes after the portCopyEntry is activated, portCopyStatus will transition to 'notReady(3)'.
The capability of an interface to be source or destination of a port copy operation is described by the 'copySourcePort(0)' and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits SHOULD be appropriately set by the agent, in order to allow for a portCopyEntry to be created.
What is portCopyStatus?
The RowStatus for this port-copy (mirroring) entry; both the source and destination interfaces must exist and have ifAdminStatus/ifOperStatus both up for the entry to be active, and it automatically transitions to notReady if either interface later goes down.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.16 | rmon | LBHUB-BOOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.16.22 | switchRMON | SMON-MIB |
| 1.3.6.1.2.1.16.22.1 | smonMIBObjects | SMON-MIB |
| 1.3.6.1.2.1.16.22.1.3 | portCopyConfig | SMON-MIB |
| 1.3.6.1.2.1.16.22.1.3.1 | portCopyTable | SMON-MIB |
| 1.3.6.1.2.1.16.22.1.3.1.1 | portCopyEntry | SMON-MIB |
| 1.3.6.1.2.1.16.22.1.3.1.1.5 | portCopyStatus | SMON-MIB |