SLE-MPLS-TP-NODE-MIB :: sleMplsTpNodeCfgControlNodeType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SLE-MPLS-TP-NODE-MIB › sleMplsTpNodeCfgControlNodeType

sleMplsTpNodeCfgControlNodeType

Module: SLE-MPLS-TP-NODE-MIB

OID (symbolic): SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlNodeType

OID (numeric): 1.3.6.1.4.1.6296.101.16.13.1.2.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID.

This object value should be zero when msleMplsTpNodeConfigControlGlobalId are assigned with non-zero value.

What is sleMplsTpNodeCfgControlNodeType?

This writable object stages whether this node's identifiers should follow the ietf(1) or itut(2) scheme, to be applied when sleMplsTpNodeCfgControlRequest is set to setMplsTpNode(1). Admins set this to choose which of the two MPLS-TP identifier conventions this node should use before committing the corresponding global-ID or ITU-T CC/ICC values. Setting this to itut(2) and then triggering setMplsTpNode(1) configures this node to use the ITU-T carrier-code identification convention rather than the IETF global-ID convention.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.13.1.2.10
snmpwalk -v2c -c public <target> SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlNodeType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.13.1.2.10.1
snmpget -v2c -c public <target> SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlNodeType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.16.13.1.2.10.1 i <value>

Start monitoring DASAN Networks SLE OLT (MPLS-TP node identity/MEP addressing configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlNodeType OID value, configure state conditions and alerts, and monitor any DASAN Networks SLE OLT (MPLS-TP node identity/MEP addressing configuration) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6296dasanDASAN-DHCP-MIB
1.3.6.1.4.1.6296.101sleMgmtDASAN-SMI
1.3.6.1.4.1.6296.101.16sleMplsSLE-MPLS-TP-BFD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6296.101.16.13sleMplsTpNodeSLE-MPLS-TP-NODE-MIB
1.3.6.1.4.1.6296.101.16.13.1sleMplsTpNodeCfgSLE-MPLS-TP-NODE-MIB
1.3.6.1.4.1.6296.101.16.13.1.2sleMplsTpNodeCfgControlSLE-MPLS-TP-NODE-MIB
1.3.6.1.4.1.6296.101.16.13.1.2.10sleMplsTpNodeCfgControlNodeTypeSLE-MPLS-TP-NODE-MIB