SLE-MPLS-TP-NODE-MIB :: sleMplsTpNodeCfgControlItutIcc

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SLE-MPLS-TP-NODE-MIB › sleMplsTpNodeCfgControlItutIcc

sleMplsTpNodeCfgControlItutIcc

Module: SLE-MPLS-TP-NODE-MIB

OID (symbolic): SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlItutIcc

OID (numeric): 1.3.6.1.4.1.6296.101.16.13.1.2.8

Node type: OBJECT-TYPE

Type: MplsIccId

Access: read-write

Description: This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID.

This object value should be zero when sleMplsTpNodeConfigControlGlobalId are assigned with non-zero value.

What is sleMplsTpNodeCfgControlItutIcc?

This writable object stages an MPLS-TP ITU-T Carrier Code (ICC) value, per RFC 6370, to be applied to this node when sleMplsTpNodeCfgControlRequest is set to setMplsTpNode(1); it should be zero when the Global Operator Identifier control object is instead assigned a non-zero value. Admins set this to configure the node's identity under the ITU-T carrier-code scheme rather than the global-ID scheme. Setting this value and then triggering setMplsTpNode(1) assigns this node its ITU-T carrier code identifier.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.13.1.2.8
snmpwalk -v2c -c public <target> SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlItutIcc

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.13.1.2.8.1
snmpget -v2c -c public <target> SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlItutIcc.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.16.13.1.2.8.1 s <value>

Start monitoring DASAN Networks SLE OLT (MPLS-TP node identity/MEP addressing configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-MPLS-TP-NODE-MIB::sleMplsTpNodeCfgControlItutIcc OID value, configure state conditions and alerts, and monitor any DASAN Networks SLE OLT (MPLS-TP node identity/MEP addressing configuration) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6296dasanDASAN-DHCP-MIB
1.3.6.1.4.1.6296.101sleMgmtDASAN-SMI
1.3.6.1.4.1.6296.101.16sleMplsSLE-MPLS-TP-BFD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6296.101.16.13sleMplsTpNodeSLE-MPLS-TP-NODE-MIB
1.3.6.1.4.1.6296.101.16.13.1sleMplsTpNodeCfgSLE-MPLS-TP-NODE-MIB
1.3.6.1.4.1.6296.101.16.13.1.2sleMplsTpNodeCfgControlSLE-MPLS-TP-NODE-MIB
1.3.6.1.4.1.6296.101.16.13.1.2.8sleMplsTpNodeCfgControlItutIccSLE-MPLS-TP-NODE-MIB