SLE-MPLS-TP-LPS-MIB :: sleMplsTpLpsCfgControlRapidTxInterval

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SLE-MPLS-TP-LPS-MIB › sleMplsTpLpsCfgControlRapidTxInterval

sleMplsTpLpsCfgControlRapidTxInterval

Module: SLE-MPLS-TP-LPS-MIB

OID (symbolic): SLE-MPLS-TP-LPS-MIB::sleMplsTpLpsCfgControlRapidTxInterval

OID (numeric): 1.3.6.1.4.1.6296.101.16.18.1.2.12

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The Rapid Tx interval in micro-Seconds. Represents the time interval to send the LPS packet to the other end, when there is a change in state of Linear Protection domain due to local input. The default value is 3.3 milli-seconds which is 3300 micro-seconds

What is sleMplsTpLpsCfgControlRapidTxInterval?

Sets the fast LPS retransmission interval, in microseconds, used immediately after a local state change on the targeted group; the syntax is pinned to the single value 1000 in this control table, unlike the wider range allowed for the read-only info-table counterpart.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.18.1.2.12
snmpwalk -v2c -c public <target> SLE-MPLS-TP-LPS-MIB::sleMplsTpLpsCfgControlRapidTxInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.18.1.2.12.1
snmpget -v2c -c public <target> SLE-MPLS-TP-LPS-MIB::sleMplsTpLpsCfgControlRapidTxInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.16.18.1.2.12.1 i <value>

Start monitoring DASAN Networks SLE-series OLT/aggregation node (MPLS-TP Linear Protection Switching status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-MPLS-TP-LPS-MIB::sleMplsTpLpsCfgControlRapidTxInterval OID value, configure state conditions and alerts, and monitor any DASAN Networks SLE-series OLT/aggregation node (MPLS-TP Linear Protection Switching status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6296dasanDASAN-DHCP-MIB
1.3.6.1.4.1.6296.101sleMgmtDASAN-SMI
1.3.6.1.4.1.6296.101.16sleMplsSLE-MPLS-TP-BFD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6296.101.16.18sleMplsTpLpsSLE-MPLS-TP-LPS-MIB
1.3.6.1.4.1.6296.101.16.18.1sleMplsTpLpsCfgSLE-MPLS-TP-LPS-MIB
1.3.6.1.4.1.6296.101.16.18.1.2sleMplsTpLpsCfgControlSLE-MPLS-TP-LPS-MIB
1.3.6.1.4.1.6296.101.16.18.1.2.12sleMplsTpLpsCfgControlRapidTxIntervalSLE-MPLS-TP-LPS-MIB